4rd week

FERNANDO HUMANES

This fourth week we continue learning to parameterize the pieces with Julen.

We are learning to enter the parameterization data of a piece in an excel and enter it directly in catia.

We have also parameterized the die matrix plate.

We have also made a visit to Mercedes de Vitoria.

The visit was spectacular we saw a company of last generation and very robotic.

Alex Del Rio

This week we start parametrizing the proyect tree. At this moment we parametreze base and the "sufridera". The parameters are used to change the dimensions of the pieces easier. To do all this parametres Gaizka and Julen explain us how do it and we practice doing diferent pieces.

We start introducing the normaliced pieces to our proyect and we continue creating and parametricing the rest of the parts.

UNAI ELORZA

On this week we are working on Parametrizing measurements. That way we can change the measumeants whenever we want . We are also making more parts for the die and each one of us in the group has a job to do. I have to work on stardard tools and parts that we can find on a catalog and draw them for the asembly for our die.


KEPA AGÜERO
These week we continue working in the die, these part is a little bit complicated comparing with the past week, we have to parametrize all the plates and all we have done, parametrize is for making the different pieces the size we want easier, in other words is a little complicated work, to make te work bee easier in the future. 

Julen is who teach us how to make parameters and Gaizke teach us how to apply the parameters in the tree. 

3rd week

FERNANDO HUMANES

In this third week, we have been parameterizing pieces in catia with Julen. These settings will come in handy to design the die. We have also been with Gaizka working on the catia tree, we have designed the guide columns of the die, the parameterized homos and we have assembled them.

We have also made a design ANFE with Nagore. With this ANFE we will be able to minimize the errors we may have in the design of our die. This work tool is very positive and very visual to improve and correct design failures of our die.

Alex Del Rio

This week we insert in our trees the die we select te first week and in this way all the teamates have the same pieces in the proyect tree. Then we desing the plates and the colum to centrate the plates and then we insert it on the proyect tree.

With Julen we start parametrizing pieces to do easier if we need change the measurements.

We also made a desing ANFE with nagore. In the ANFE we have to think about what could be a possible mistake and how we can minimize it. UNAI ELORZA

On the week of October 21, we made our first part and put it in the Catia tree. We are still working on this program. As I said before, we dont have much time for working on other things. We also made an AMFE to know what can give problems and what can can be good or bad for us for designing the die and the parts that we must put in.

The first picture is what we  first we made for the assembly
On the second picture you can see the assambly made in our die

On the second picture you can see the assambly made in our die.

 

                 

    

KEPA AGÜERO

In these week we star making our own design tree for our team die. After that we star workin on the tree ñearning how we can add plates to the work and make them fit together. Also we asembly      4 columns in the work and to finish we add to the proyect the sheet metal we chose, that was                fernandos but we change couple of things to improbe the design and make our job the better we          can. The result of all of that is the following picture. At the beggining it seems very difficult job to      do, but now a day we are more advantage and more comfortable dealing with all problemes we            can have